COMMUNICATION PORT-1

V200-19-ET1 Ethernet COM Port
The V200-19-ET1 Ethernet COM Port is a communication module that enables you to install an Ethernet COM
port into compatible Vision controllers. The Ethernet port enables you to implement communications via
TCP/IP, such as MODBUS over TCP.
Before using this product, it is the responsibility of the user to read and understand this document
and any accompanying documentation.
All examples and diagrams shown herein are intended to aid understanding, and do not guarantee
operation. Unitronics accepts no responsibility for actual use of this product based on these
examples.
Please dispose of this product in accordance with local and national standards and regulations.
Only qualified service personnel should open this device or carry out repairs.
User safety and equipment protection guidelines
This document is intended to aid trained and competent personnel in the installation of this equipment as
defined by the European directives for machinery, low voltage, and EMC. Only a technician or engineer trained
in the local and national electrical standards should perform tasks associated with the device’s electrical wiring.
Symbol Meaning Description
Symbols are used to highlight
The identified danger causes physical
information relating to the user’s
Danger
and property damage.
personal safety and equipment
protection throughout this document. The identified danger can cause
Warning
When these symbols appear, the physical and property damage.
associated information must be read
carefully and understood fully. Caution Caution Use caution.
Failure to comply with appropriate safety guidelines can result in severe personal injury
or property damage. Always exercise proper caution when working with electrical
equipment.
Check the user program before running it.
Do not attempt to use this device with parameters that exceed permissible levels.
Install an external circuit breaker and take appropriate safety measures against short-
circuiting in external wiring.